Fluke Z80AA won't run Midway Boards

My Pod Passes self test, yet it won't run a fully working Pac man board.
I've tried it using the run UUT defaults. Am I missing something on the
setup, or do I have a pod error?

 I notice it doesn't pass the buss test either. I get numerous data bit tied
low errors. When I loop them, it flips back and forth between Tied Low and
OK.

Mark Hooks

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sat Nov 1 16:26:27 2008