Re: Fluke Z80AA won't run Midway Boards

Mark Hooks wrote:
> My Pod Passes self test, yet it won't run a fully working Pac man board.
> I've tried it using the run UUT defaults. Am I missing something on the
> setup, or do I have a pod error?
>
>
>
> I notice it doesn't pass the buss test either. I get numerous data bit tied
> low errors. When I loop them, it flips back and forth between Tied Low and
> OK.
>
>
>
> Mark Hooks
>
>
I have no trouble running Pacman/Ms with a regular Z80pod, yours must be
ill...I have a test jig (I think) for servicing the Z80 pod, somewhere...

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/