AL SACCO_hm wrote:
> HELP FOR FLUKE 9100 USER
>
> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....
> if no pod is attached to 9100 during it comes up "no pod connected".....
> if any pod is attached it comes up "enabled line caused timeout"
> any idea or help would be helpful.....
>
> AL SACCO
> _______________________________________________
>
As I recall you can't hook up a pod while the power is on, only when off...
John :-#)#
--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Nov 29 02:54:24 2010
This archive was generated by hypermail 2.1.8 : Mon Nov 29 2010 - 04:50:00 EST