Re: FLUKE 9100A SERIES QUESTION

Thanks for the help. !!!!!
.

"martin@guddler.co.uk" <martin@guddler.co.uk> wrote:

>Al,
>
>Do you have the ribbon cable in the test socket? If so, this is normal behavior.
>
>Martin.
>
>Sent from my iPhone
>
>On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007@hotmail.com> wrote:
>
>> HELP FOR FLUKE 9100 USER
>>
>> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....
>> if no pod is attached to 9100 during it comes up "no pod connected".....
>> if any pod is attached it comes up "enabled line caused timeout"
>> any idea or help would be helpful.....
>>
>> AL SACCO
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Nov 29 08:35:44 2010