Al,
Do you have the ribbon cable in the test socket? If so, this is normal behavior.
Martin.
Sent from my iPhone
On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007@hotmail.com> wrote:
> HELP FOR FLUKE 9100 USER
>
> Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested....
> if no pod is attached to 9100 during it comes up "no pod connected".....
> if any pod is attached it comes up "enabled line caused timeout"
> any idea or help would be helpful.....
>
> AL SACCO
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Nov 29 05:58:54 2010
This archive was generated by hypermail 2.1.8 : Tue Nov 30 2010 - 10:50:00 EST