Re: 6800 to 6502 pod conversion...

So that should work on a converted 6800 pod as well because they are really identical.

Op 15 dec. 2012 om 03:14 heeft John Robertson <jrr@flippers.com> het volgende geschreven:

> Andre Huijts wrote:
>> Decided to convert my 6800 to a 6502 pod tonight. I was lucky as both pos are the "jumper type" so it was merely copying the jumper set-up from the 6502 and replacing the 6800 with the 6502 of the defective pod.
>>
>> Hooked it up to the 9100A and it went through self-test without any problem :)
>>
>> Just for fun, I replaced the 6502 with a CM630P (bought 5 from Bulgaria on e-bay) and sure enough it went through self-test fine again.
>>
>>
>> André Huijts
>> andre.huijts@upcmail.nl
> The regular 6502 pod supports a 6502B so put the fastest one you can find in it...
>
> John :-#)#
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sat Dec 15 03:13:54 2012