Re: 6800 to 6502 pod conversion...

Andre Huijts wrote:
> Decided to convert my 6800 to a 6502 pod tonight. I was lucky as both pos are the "jumper type" so it was merely copying the jumper set-up from the 6502 and replacing the 6800 with the 6502 of the defective pod.
>
> Hooked it up to the 9100A and it went through self-test without any problem :)
>
> Just for fun, I replaced the 6502 with a CM630P (bought 5 from Bulgaria on e-bay) and sure enough it went through self-test fine again.
>
>
> André Huijts
> andre.huijts@upcmail.nl
>
>
The regular 6502 pod supports a 6502B so put the fastest one you can
find in it...

John :-#)#

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Dec 14 21:14:19 2012