6800 to 6502 pod conversion...

From: Andre Huijts <a.huijts_at_upcmail.nl>
Date: Fri Dec 14 2012 - 19:23:18 EST

Decided to convert my 6800 to a 6502 pod tonight. I was lucky as both pos are the "jumper type" so it was merely copying the jumper set-up from the 6502 and replacing the 6800 with the 6502 of the defective pod.

Hooked it up to the 9100A and it went through self-test without any problem :)

Just for fun, I replaced the 6502 with a CM630P (bought 5 from Bulgaria on e-bay) and sure enough it went through self-test fine again.

André Huijts
andre.huijts@upcmail.nl

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Dec 14 19:23:30 2012

This archive was generated by hypermail 2.1.8 : Fri Dec 14 2012 - 21:50:00 EST