The 9100 will only see about 60mb. If you put in a larger drive it will see it as zero bytes, but this does not cause problems. I used a 100mb drive that showed as zero bytes for a few years.
Andrew Welburn (mobile)
www.andys-arcade.com
On 1 Mar 2013, at 06:48, "David Shoemaker" <davids@oz.net> wrote:
> Well with all the trouble going around trying to get a SCSI -> IDE for CF to
> work anyone know what the max size of SCSI drive will work in the 9100?
> There are a few on ebay and I need to replace the drive in my 9100.
>
>
>
> David
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Mar 1 02:27:21 2013
This archive was generated by hypermail 2.1.8 : Fri Mar 01 2013 - 11:50:02 EST