Re: Fluke 9100 hard drives

Mine has a 300 MB SCSI drive installed.

Op 1 mrt. 2013, om 08:26 heeft Andrew Welburn <andy@andysarcade.net> het volgende geschreven:

> The 9100 will only see about 60mb. If you put in a larger drive it will see it as zero bytes, but this does not cause problems. I used a 100mb drive that showed as zero bytes for a few years.
>
> Andrew Welburn (mobile)
> www.andys-arcade.com
>
> On 1 Mar 2013, at 06:48, "David Shoemaker" <davids@oz.net> wrote:
>
>> Well with all the trouble going around trying to get a SCSI -> IDE for CF to
>> work anyone know what the max size of SCSI drive will work in the 9100?
>> There are a few on ebay and I need to replace the drive in my 9100.
>>
>>
>>
>> David
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

André Huijts
andre.huijts@upcmail.nl

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Mar 1 10:50:56 2013