Re: Fluke 9010A Install with FIDE

I tried the prior and all my settings look good.  Anyone have the cable pin outs? I would like to ohm out the cable.

Thanks

Justin

Sent from my Verizon Wireless 4G LTE DROID

Rodger Boots <rlboots2@gmail.com> wrote:

>Flow control is probably off or set wrong on computer end. Open up control
>panel, system, hardware, com ports. Selects your com port and port
>settings. Flow control should be XON/XOFF for software flow control or
>Hardware for hardware flow control. Use whichever matches the programmer
>setup.
>
>If you're using Hardware and it doesn't work your null modem cable may be
>wired wrong.
>
>Good luck.
>
>
>On Fri, Apr 12, 2013 at 5:36 PM, JJ <rugd2go@comcast.net> wrote:
>
>> I tried to connect to my 9010a and laptop using xp and received a buffer
>> overrun or overflow message on the 9010. Any ideas on what the cause might
>> be? I was using a null cable.
>>
>> Justin
>>
>> Sent from my Verizon Wireless 4G LTE DROID
>>
>> Matthew Rossiter <matt@rossiters.com> wrote:
>>
>> >Has anyone gotten Fluke FIDE to work in Windows 7? I've always just
>> >used my old Win XP laptop with a USB/Serial adapter and it works great.
>> >
>> >On 4/12/2013 11:13 AM, Theron Troxel wrote:
>> >>
>> >> I found out what I was doing wrong. Didn't have a null modem cable
>> adapter. Ended up ordering a serial cable adapter, which I knew I didn't
>> want. Will try again with the correct part.
>> >>
>> >> ________________________________
>> >> From: Theron Troxel <troxelone@yahoo.com>
>> >> To: Technical Tools Mail List <techtoolslist@flippers.com>
>> >> Sent: Friday, April 12, 2013 1:07 PM
>> >> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> ________________________________
>> >> From: Theron Troxel <troxelone@yahoo.com>
>> >> To: "techtoolslist@flippers.com" <techtoolslist@flippers.com>
>> >> Sent: Monday, April 1, 2013 5:50 PM
>> >> Subject: [Techtoolslist] Fluke 9010A Install with FIDE
>> >>
>> >> Trying to get my fluke to respond to my computer. I have a USB-to-RS232
>> cord, and my computer recognize the cord. I went to settings on my computer
>> and set it to com1 and matched everything to the computer and fluke.
>> >>
>> >> Wrote a simple program that just displays "test" and tried sending it
>> through the Fluke FIDE software. The fluke never responds to when I send
>> the program. I don't get any errors of any type on the fluke. However, on
>> the Fluke FIDE I get the following error:
>> >>
>> >>
>> >> Starting process...
>> >> WARNING: Include file already exists. File may have been included
>> >> multiple times, or two files with the exact same file name may exist.
>> >> It is recommended that you give your files distictive file names.
>> >> C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program Files
>> (x86)\Fluke FIDE\Internal\test.9lc (exists).
>> >> ERROR: Could not create batch file C:\Program Files (x86)\Fluke
>> FIDE\Internal\9lc.bat.
>> >> Permission denied
>> >> Batch
>> >> file processing failed.
>> >> _______________________________________________
>> >> Techtoolslist mailing list
>> >> Techtoolslist@flippers.com
>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>> >> _______________________________________________
>> >> Techtoolslist mailing list
>> >> Techtoolslist@flippers.com
>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>> >> _______________________________________________
>> >> Techtoolslist mailing list
>> >> Techtoolslist@flippers.com
>> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>> >
>> >_______________________________________________
>> >Techtoolslist mailing list
>> >Techtoolslist@flippers.com
>> >http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>
>_______________________________________________
>Techtoolslist mailing list
>Techtoolslist@flippers.com
>http://seven.pairlist.net/mailman/listinfo/techtoolslist
>FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Apr 12 22:38:39 2013