Re: Fluke 9010A Install with FIDE

What connector size(s)? I'm assuming 25 pin at programmer and 9 at
computer, but what do you ACTUALLY have?

On Fri, Apr 12, 2013 at 9:38 PM, JJ <rugd2go@comcast.net> wrote:

> I tried the prior and all my settings look good. Anyone have the cable
> pin outs? I would like to ohm out the cable.
>
> Thanks
>
> Justin
>
> Sent from my Verizon Wireless 4G LTE DROID
>
> Rodger Boots <rlboots2@gmail.com> wrote:
>
> >Flow control is probably off or set wrong on computer end. Open up
> control
> >panel, system, hardware, com ports. Selects your com port and port
> >settings. Flow control should be XON/XOFF for software flow control or
> >Hardware for hardware flow control. Use whichever matches the programmer
> >setup.
> >
> >If you're using Hardware and it doesn't work your null modem cable may be
> >wired wrong.
> >
> >Good luck.
> >
> >
> >On Fri, Apr 12, 2013 at 5:36 PM, JJ <rugd2go@comcast.net> wrote:
> >
> >> I tried to connect to my 9010a and laptop using xp and received a buffer
> >> overrun or overflow message on the 9010. Any ideas on what the cause
> might
> >> be? I was using a null cable.
> >>
> >> Justin
> >>
> >> Sent from my Verizon Wireless 4G LTE DROID
> >>
> >> Matthew Rossiter <matt@rossiters.com> wrote:
> >>
> >> >Has anyone gotten Fluke FIDE to work in Windows 7? I've always just
> >> >used my old Win XP laptop with a USB/Serial adapter and it works great.
> >> >
> >> >On 4/12/2013 11:13 AM, Theron Troxel wrote:
> >> >>
> >> >> I found out what I was doing wrong. Didn't have a null modem cable
> >> adapter. Ended up ordering a serial cable adapter, which I knew I
> didn't
> >> want. Will try again with the correct part.
> >> >>
> >> >> ________________________________
> >> >> From: Theron Troxel <troxelone@yahoo.com>
> >> >> To: Technical Tools Mail List <techtoolslist@flippers.com>
> >> >> Sent: Friday, April 12, 2013 1:07 PM
> >> >> Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE
> >> >>
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> ________________________________
> >> >> From: Theron Troxel <troxelone@yahoo.com>
> >> >> To: "techtoolslist@flippers.com" <techtoolslist@flippers.com>
> >> >> Sent: Monday, April 1, 2013 5:50 PM
> >> >> Subject: [Techtoolslist] Fluke 9010A Install with FIDE
> >> >>
> >> >> Trying to get my fluke to respond to my computer. I have a
> USB-to-RS232
> >> cord, and my computer recognize the cord. I went to settings on my
> computer
> >> and set it to com1 and matched everything to the computer and fluke.
> >> >>
> >> >> Wrote a simple program that just displays "test" and tried sending it
> >> through the Fluke FIDE software. The fluke never responds to when I send
> >> the program. I don't get any errors of any type on the fluke. However,
> on
> >> the Fluke FIDE I get the following error:
> >> >>
> >> >>
> >> >> Starting process...
> >> >> WARNING: Include file already exists. File may have been included
> >> >> multiple times, or two files with the exact same file name may exist.
> >> >> It is recommended that you give your files distictive file names.
> >> >> C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program
> Files
> >> (x86)\Fluke FIDE\Internal\test.9lc (exists).
> >> >> ERROR: Could not create batch file C:\Program Files (x86)\Fluke
> >> FIDE\Internal\9lc.bat.
> >> >> Permission denied
> >> >> Batch
> >> >> file processing failed.
> >> >> _______________________________________________
> >> >> Techtoolslist mailing list
> >> >> Techtoolslist@flippers.com
> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >> >> _______________________________________________
> >> >> Techtoolslist mailing list
> >> >> Techtoolslist@flippers.com
> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >> >> _______________________________________________
> >> >> Techtoolslist mailing list
> >> >> Techtoolslist@flippers.com
> >> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >> >
> >> >_______________________________________________
> >> >Techtoolslist mailing list
> >> >Techtoolslist@flippers.com
> >> >http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >> _______________________________________________
> >> Techtoolslist mailing list
> >> Techtoolslist@flippers.com
> >> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> >>
> >_______________________________________________
> >Techtoolslist mailing list
> >Techtoolslist@flippers.com
> >http://seven.pairlist.net/mailman/listinfo/techtoolslist
> >FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> >Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Apr 12 23:12:15 2013