I've had many pods that the only problem was a problem was with the self
test socket not making good contact.
Kevin
On Tue, Apr 16, 2013 at 10:39 AM, Theron Troxel <troxelone@yahoo.com> wrote:
> I have a 6809 pod that I finally got around to testing and is coming up
> with "POD TIMEOUT - ATTEMPTING RESET" error. Looking at the manual for
> the 6809 pod, it says to check for short to the crystal or clock depending
> on the chip. Would I start on pin 39 of the self test socket and follow
> the schematics back and check the lines on U27, U22, and U23 that's if the
> enable line on U27 is low? Or, am I looking in the wrong spot on the
> schematics?
>
> Any other advice when trouble shooting these?
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue Apr 16 12:35:52 2013
This archive was generated by hypermail 2.1.8 : Tue Apr 16 2013 - 13:50:00 EDT