On Wed, 8 Jul 1998, David Shoemaker (Comforce/RhoTech) wrote:
> OK so I have a SW with a dead high voltage transformer. So I am going to
> put in a WG. Whats the trick to removing the ampliphone tube? Do you have
> to unbolt the tube from the mounting wings or remove part of the monitor
> bezel support wood or what?
You take it out from the front. Don't remove the tube from
two gold-colored brackets -- the brackets unbolt from the wood, and
you just pull the tube and brackets out.
You swing the Control Panel forward, remove the (big) plastic
bezel, and then unbolt and remove the monitor.
The Star Wars manual details how to take it out, and that
manual is up online somewhere (I got one online somewhere.)
> And then once its out does the WG fit in there easily?
It drops right in -- just like the Amplifone. There is
nothing tricky about it. The chassis around the WG fits right
into the places where the barckets bolted into, so you leave
the brackets with thte Amplifone tube.
Joe
Received on Wed Jul 8 22:43:25 1998
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:24 EDT