On Thu, 1 Oct 1998, Rod wrote:
> just going through it. I have a Star Trek and I will scan a print of the
> cabinet wiring diagram and send it to you. If you need more I can go down
> and take the back off check it out for you. I am located in Kelowna BC
> Canada.
Thanks ! That looks similar to the diagram I got from www.spies.com.
However, maybe your's is bigger, because I can actually read the connector
numbers on it. Unfortunately, my power supply doesn't have numbers next to
the connectors.
So, if you (or anyone) could look at yours and let me know which is which, I
would apprecaite it. I'm leaving my ASCII art below.
> .... .... .......... ..........
> 4 1 4 1 1 1 1 1
> 0 0
> Vout? Vin?
It also looks like P4 on the PS connects directly to P5 on the card cage,
with only a tap for the coin mech lights from pins 6&7. I'ld appreciate if
you can confirm this also, since I have on occasion found the diagrams to be
wrong.
:-)
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
Received on Fri Oct 2 15:43:11 1998
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:41 EDT