Re: HELP......Dead Board

No it isnt dead totally! But yes you are right about the crystal speed.
There are 2 8148 chips in the video out part of the pcb....One for the X and
one for the Y...(I assume) One chip has signal at some of the prongs...all
on the same side.....one has nothing to it....... This board had a video
problem when I got it.....Two parts where blown to bits.....I think some one
shorted the video out.........Any help welcome!!!!!!!!!
Bob
-----Original Message-----
From: Kurt Mahan <kmahan@xmission.com>
To: vectorlist@mcfeeley.cc.utexas.edu <vectorlist@mcfeeley.cc.utexas.edu>
Date: Thursday, October 22, 1998 9:29 PM
Subject: Re: HELP......Dead Board

>> I have a dead Black Widow and I am trying to get it up.. I need basic
info
>> on how to start trouble shooting this!! Any info would be a great help!!!
>> My email add is Breed@medinaonline.com HELP!!!!!!!!!
>
>If dead means "does nothing" and you've got good power, etc. I'd look to
>see if the processor crystal is still sticking up (and attached).. This
>is one of the most common problems I run into. Wasn't it 12.096mhz?
>
>Kurt
>
>
>
Received on Thu Oct 22 20:45:56 1998