Before you go ripping the G08 apart, verify that your game boards are
putting out good X and Y signals...the G08's spot killer will shut down
the HV if the signals comming from the game board are bad.
You might want to check for a blinking LED on the CPU board when you press
the red test plunger...if it does pulse, you have bad rams...this may
cause bad XY signals.
If you do know for a fact that the flyback is shot, well, sorry for
wasting your time :)!!!!
Ed
On Wed, 11 Nov 1998, Matt Rossiter - Verio Southern California wrote:
> Does anyone have a Flyback Transformer for a WG G-08 monitor? I lost HV
> on mine and determined that the Flyback Transformer is dead. If anyone
> has a one that works or knows where I can get one - please let me know.
>
>
> Thanks!!
>
>
> Matt
>
>
Received on Wed Nov 11 08:21:01 1998
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:23 EDT