Re: Flyback Transformer Needed

Oh yeah - (sorry to keep blabbing) -

this is one thing I did forget to do. Thanks Ed - I'll check the X-Y
signals. If this is the case, Ed just saved me some trouble.

Thanks again.

Matt

_____________________________________________________________________

On Wed, 11 Nov 1998, Ed Henciak wrote:

> Before you go ripping the G08 apart, verify that your game boards are
> putting out good X and Y signals...the G08's spot killer will shut down
> the HV if the signals comming from the game board are bad.
>
> You might want to check for a blinking LED on the CPU board when you press
> the red test plunger...if it does pulse, you have bad rams...this may
> cause bad XY signals.
>
> If you do know for a fact that the flyback is shot, well, sorry for
> wasting your time :)!!!!
>
> Ed
>
>
>
> On Wed, 11 Nov 1998, Matt Rossiter - Verio Southern California wrote:
>
> > Does anyone have a Flyback Transformer for a WG G-08 monitor? I lost HV
> > on mine and determined that the Flyback Transformer is dead. If anyone
> > has a one that works or knows where I can get one - please let me know.
> >
> >
> > Thanks!!
> >
> >
> > Matt
> >
> >
>
>
Received on Wed Nov 11 10:14:53 1998