Re: Ampliphone HV-other options?!

Ummm this is sounding more and more like you are getting back to my
Raster Hack. Still running after two years...

John :-#)#

Zonn wrote:
>
> On Thu, 10 Jun 1999 15:27:52 -0500, you wrote:
>
> >Look at http://randyfromm.com/techdept/ for those schematics.
>
> Well I just checked out the WG schematics (JPG!, uck!, and parts of
> the schematics are chopped off! Geeze!)
>
> Anyways we struck out there. The flybacks' primaries are designed for
> 123v. It looks like most all the raster monitors run of this voltage.
>
> So maybe the deal is to design a HV supply using an isolation
> transformer, a 123v regulator (with error correction for adjusting the
> output HV), and both the Horizontal transformer and Flyback of a WG.
>
> I didn't check the G2 voltages, but they could probably be made
> usable, especially if they're to high. (Too low might be a problem!)
>
> It might be overkill, but it still might be cheaper than a single
> flyback from Wintron. And the parts will probably be available for a
> long time.
>
> -Zonn

-- 
 John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9     
 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)  
 mailto:jrr_at_flippers.com, web page http://www.flippers.com      
        "Old pinballers never die, they just flip out."