In my own defense I've rotated the yoke on at least 10 games but they were raster and
maybe less sensitive to convergence settings.
Dan
On Mon, 04 Sep 2000 14:01:07 -0400, you wrote:
>Swapping the yoke wires *will* work. You should use a meter to make sure
>which wires you are swapping. You usually can't just rotate the plug.
>Don't rotate the yoke, as you will have to reconverge.
>
>Jon
>
>At 03:02 AM 9/4/00 EDT, you wrote:
>>I'm working on a Cosmic Chasm. I put an NOS G-08 monitor in it, and the
>>picture is upside down. I tried reversing the Yolk wires, but I get no
>>picture when I swap the wires. Any suggestions?
>>
>>Scott
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Sep 4 19:23:06 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:04 EDT