RE: Battlezone Sound Prob

Check the big green (or red) mylar capacitor (0.47 uf I think) near the
edge connector on the AUX board. It is either missing or has one of the
leads broken. I'm at work, so I don't have the schematics.

-Scott

At 02:41 PM 9/20/00 -0400, Todd Miller wrote:
>My mini does the exact same thing, a quick whack to the left side of
>the cab fixes it but eventually the bass from the speaker brings it back.
>It just started doing this, so I only got as far as tapping the PBC with
>my finger to make it come and go. Probably just a cold joint or a dirty
>IC leg.
>
>
>Todd Miller, LAN Administrator
>Ron Weber and Associates
>103 E. State Street, Mason City, IA 50401
>(515)423-4293/(515)423-4594 FAX
>http://www.telethinking.com <http://www.telethinking.com>
>
>
> -----Original Message-----
> From: Dave Downin [SMTP:downin@smarty.smart.net]
> Sent: Wednesday, September 20, 2000 12:01 AM
> To: vectorlist@synthcom.com
> Subject: VECTOR: Battlezone Sound Prob
>
> I've got a weird problem that's been bugging me on my Battlezone
>mini for a
> while now. Game plays fine. Problem is that the sound of the tank
>engine is
> 2-3 times louder than any of the other sounds and thus mostly drowns
>them out
> (they are still slightly audible).
>
> Looking at the schematic, I can't for the life of me see what could
>cause a
> problem like this. Any ideas?
>
> --
> Dave Downin (dave@arlo.net)
>
>============================================================================
>=
> "Sorry, the world is nuts. It can't be helped" - Arlo
>Guthrie
> ArloNet - http://www.arlo.net/
>
>============================================================================
>=
> Any commercial e-mail sent to any of the above accounts will be
>automatically
> rejected and subject to a $500 processing fee.
>
>---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>in the
> ** message body to vectorlist-request@synthcom.com. Please direct
>other
> ** questions, comments, or problems to neil@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

--
Scott Swazey        QUALCOMM, CDMA Technology     Work: (858) 651-8745
mailto:sswazey@qualcomm.com AA-302E               Pager:(619) 683-5210
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.