RE: Tempest Cabinet wall thickness??

I would measure it for sure; I've purchased 3/4" t-molding before which ends up thinner than the 3/4" sides (ie some 3/4" t-molding isn't REALLY 3/4"). Maybe someone replaced the t-molding on your cabinet.

> -----Original Message-----
> From: Mark E Davidson [mailto:Burbs1@concentric.net]
> Sent: Tuesday, October 10, 2000 1:21 PM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: Tempest Cabinet wall thickness??
>
>
> I have a small amount of 1" T molding, so I know it does exist
>
> Christopher Moore wrote:
>
> > Hi All,
> >
> > Here's a trivial little question about cabinets.
> >
> > I picked up the Tempest cabinet that John Mehrtens
> > posted on this list last week. The side pieces are
> > wider than the T-moulding. I thought that since it
> > was out in the weather that the particle board had
> > just expanded.
> >
> > However, it is still uniform thickness. I didn't
> > measure it but I'd say 1". My Irish made Tempest
> > has a the same wall thickness as the particle board.
> > I belive 3/4".
> >
> > After looking over the cabinet, I'm wondering if
> > this Tempest used 1" particle board instead of 3/4"
> > because it doesn't look all that water damaged except
> > for on the bottom left side for an 1 inch or to.
> >
> > The damage really looks like they used 1" particle board
> > with 3/4" T-moulding and the damage came from not
> > having the T-moulding completely cover the edge.
> >
> > Does anybody else have or seen a Tempest with 1" particle
> > board?
> >
> > Is T-moulding available in the 1" thickness?
> >
> > Thanks for reading.
> > -Chris Moore
> >
> > P.S. After reading about the Bradley Trainer for years
> > It's really cool to see one finally surface. It's kind
> > of like finding the loch ness monster. :-)
> >
> > I hope Jess Askey posts a write up on it in his gamearchive site.
> >
> >
> ______________________________________________________________
> ___________
> > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Oct 10 15:30:43 2000