Re: 6100 Wavey Letters

It hasn't had the yoke feedback resistors (2 large wirewound resistors near
where yoke plugs in) replaced, has it? These should have the letters "NI" or
actually say "non-inductive" on them.

Steven Gregory wrote:

> The cover is on the cage. The area around the high score
> has a slight wave and broken letters and the rest of the screen
> has somewhat broken letters all over. I can say the problem
> is definitely on the deflection board.
>
> On Sun, 15 Oct 2000 01:39:47 -0400, Chris Loggans wrote:
>
> >Is the cage on the HV box? Without the cage/cover there is a lot of
> >electromagnetic interference that will cause distorted letters.
> >
> >Good luck,
> >-Chris
> >
> >
> >-----Original Message-----
> >From: Steven Gregory
> >To: vectorlist@synthcom.com
> >Sent: 10/14/00 11:19 PM
> >Subject: Re: VECTOR: 6100 Wavey Letters
> >
> >My waves where much worse than shown in your pic. After
> >removing both, the problem is like what you were experiencing.
> >
> >
> >On Sat, 14 Oct 2000 22:56:25 -0400, chumblespuzz wrote:
> >
> >>Steve,
> >>
> >>As Jon Raiford stated in his reply to my original post, simply removing
> >C703
> >>and C603 from the deflection board solved this problem.
> >>
> >>-roy-
> >>
> >>----- Original Message -----
> >>From: "Steven Gregory" <sgregory@arcadeshop.com>
> >>To: <vectorlist@synthcom.com>
> >>Sent: Saturday, October 14, 2000 10:31 PM
> >>Subject: Re: VECTOR: 6100 Wavey Letters
> >>
> >>
> >>> I have this same problem with a WG XY. Any help would
> >>> be appreciated.
> >>>
> >>>
> >>> On Tue, 10 Oct 2000 00:30:25 -0400, chumblespuzz wrote:
> >>>
> >>> >Hi All,
> >>> >
> >>> >Me again, still working on the Tempest.
> >>> >
> >>> >My 6100 has a strange wave to it. Check out:
> >>> >http://members.home.net/chumblespuzz/images/6100_wave1.jpg
> >>> >
> >>> >Look at the "S" in scores and the angled line on the "R". See how
> >they
> >>are
> >>> >wavey? Note that the "O" and the "E" are not, as well as the 0101s
> >below.
> >>> >
> >>> >Also note similar issues in the bottom image. This only occurs on
> >the
> >>right
> >>> >side (bottom when horizontal).
> >>> >
> >>> >Any thoughts to why? It's not the game board as it test's fine in
> >another
> >>> >machine. The monitor was just capped.
> >>> >
> >>> >Thanks!
> >>> >-roy-
> >>> >
> >>> >
> >>>
> >>>----------------------------------------------------------------------
> >-----
> >>> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> >in
> >>the
> >>> >** message body to vectorlist-request@synthcom.com. Please direct
> >other
> >>> >** questions, comments, or problems to neil@synthcom.com.
> >>> >
> >>>
> >>>
> >>>
> >>>
> >>> Steven Gregory
> >>> ArcadeShop Amusements
> >>> sgregory@arcadeshop.com
> >>> http://www.arcadeshop.com
> >>>
> >>>
> >>>
> >------------------------------------------------------------------------
> >--
> >>-
> >>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> >in
> >>the
> >>> ** message body to vectorlist-request@synthcom.com. Please direct
> >other
> >>> ** questions, comments, or problems to neil@synthcom.com.
> >>
> >>-----------------------------------------------------------------------
> >----
> >>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> >the
> >>** message body to vectorlist-request@synthcom.com. Please direct other
> >>** questions, comments, or problems to neil@synthcom.com.
> >>
> >
> >
> >
> >
> >Steven Gregory
> >ArcadeShop Amusements
> >sgregory@arcadeshop.com
> >http://www.arcadeshop.com
> >
> >
> >------------------------------------------------------------------------
> >---
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> >the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
> >
>
> Steven Gregory
> ArcadeShop Amusements
> sgregory@arcadeshop.com
> http://www.arcadeshop.com
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.