RE: 6100 Wavey Letters

The cover is on the cage. The area around the high score
has a slight wave and broken letters and the rest of the screen
has somewhat broken letters all over. I can say the problem
is definitely on the deflection board.

On Sun, 15 Oct 2000 01:39:47 -0400, Chris Loggans wrote:

>Is the cage on the HV box? Without the cage/cover there is a lot of
>electromagnetic interference that will cause distorted letters.
>
>Good luck,
>-Chris
>
>
>-----Original Message-----
>From: Steven Gregory
>To: vectorlist@synthcom.com
>Sent: 10/14/00 11:19 PM
>Subject: Re: VECTOR: 6100 Wavey Letters
>
>My waves where much worse than shown in your pic. After
>removing both, the problem is like what you were experiencing.
>
>
>On Sat, 14 Oct 2000 22:56:25 -0400, chumblespuzz wrote:
>
>>Steve,
>>
>>As Jon Raiford stated in his reply to my original post, simply removing
>C703
>>and C603 from the deflection board solved this problem.
>>
>>-roy-
>>
>>----- Original Message -----
>>From: "Steven Gregory" <sgregory@arcadeshop.com>
>>To: <vectorlist@synthcom.com>
>>Sent: Saturday, October 14, 2000 10:31 PM
>>Subject: Re: VECTOR: 6100 Wavey Letters
>>
>>
>>> I have this same problem with a WG XY. Any help would
>>> be appreciated.
>>>
>>>
>>> On Tue, 10 Oct 2000 00:30:25 -0400, chumblespuzz wrote:
>>>
>>> >Hi All,
>>> >
>>> >Me again, still working on the Tempest.
>>> >
>>> >My 6100 has a strange wave to it. Check out:
>>> >http://members.home.net/chumblespuzz/images/6100_wave1.jpg
>>> >
>>> >Look at the "S" in scores and the angled line on the "R". See how
>they
>>are
>>> >wavey? Note that the "O" and the "E" are not, as well as the 0101s
>below.
>>> >
>>> >Also note similar issues in the bottom image. This only occurs on
>the
>>right
>>> >side (bottom when horizontal).
>>> >
>>> >Any thoughts to why? It's not the game board as it test's fine in
>another
>>> >machine. The monitor was just capped.
>>> >
>>> >Thanks!
>>> >-roy-
>>> >
>>> >
>>>
>>>----------------------------------------------------------------------
>-----
>>> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>in
>>the
>>> >** message body to vectorlist-request@synthcom.com. Please direct
>other
>>> >** questions, comments, or problems to neil@synthcom.com.
>>> >
>>>
>>>
>>>
>>>
>>> Steven Gregory
>>> ArcadeShop Amusements
>>> sgregory@arcadeshop.com
>>> http://www.arcadeshop.com
>>>
>>>
>>>
>------------------------------------------------------------------------
>--
>>-
>>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>in
>>the
>>> ** message body to vectorlist-request@synthcom.com. Please direct
>other
>>> ** questions, comments, or problems to neil@synthcom.com.
>>
>>-----------------------------------------------------------------------
>----
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>>
>
>
>
>
>Steven Gregory
>ArcadeShop Amusements
>sgregory@arcadeshop.com
>http://www.arcadeshop.com
>
>
>------------------------------------------------------------------------
>---
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>

Steven Gregory
ArcadeShop Amusements
sgregory@arcadeshop.com
http://www.arcadeshop.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sun Oct 15 02:23:08 2000