On Mon, 16 Oct 2000, Jon Raiford wrote:
> If everything was hooked up correctly and R29 fried, you have a contact
> problem on the edge connector. This is a very common problem. I think
> half of my AR2's have had R29 blown :)
Thanks. I'm assuming I'm looking for a contact that isn't making contact,
as opposed to a short ?
R29 connects +5 to +sense, parallel with a diode and a cap. I'm supposing
if +5 doesn't make contact, but sense does, all the current comes through
the sense pin and R29, frying it ?
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Oct 17 00:16:59 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:53 EDT