On Tue, 17 Oct 2000, Christopher X. Candreva wrote:
> 830 mA, .29ohm, 1.0uH
>
> I've never speced an inductor, but from theory you would ideally want it not
> to have any resistance. So the current rating should be a minimum, a LOWER
> ohm rating would be OK, and obviously the correct number of uH .
To clarify, I am saying that the replacement should be rated at LEAST 830mA,
and at MOST .29 ohm.
Am I correct ?
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Oct 17 11:18:54 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:53 EDT