Re: Sega monitor questions

Off course I'm using the original supply! I did hardwire the 5 VDC line in
(removing the molex connector on the power supply). Does the connector on
the cage also burn?

The assumption here is the XY generator is effected by the ripple in the
+5VDC & not from the monitor right?

The spot killer idea sound good and I'll probably look into that.

I may place a SPS in there once I get closer to installing Atari games.

Thanks,
Kev

Oh, where did you get that relay?

> I hope you are NOT using the original +5VDC power supply! Sounds like
> ripple to me. Plus they have a bad tendency to burn the ground connectors
> and this will cause a ground fault (ground voltage reference) that can fry
> the monitor. I REALLY recommend that you wire in a computer switching
power
> supply to this game, plus hook up a 6VDC relay across the +5VDC supply and
> wire it so if the +5VDC fails then power is cut off to the monitor. 4PDT
> relay with ten amp contacts would work very well here.
>
> John :-#)#

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Nov 27 12:46:26 2000