Re: Red Barron Board?

There is only one Red baron set in Mame and my labels match that set.

BTW - I checked the pinouts to see if I could test it in my Asteroids, but it
requires 22 volts. I'm hoping this is only used for the sound section and I
can make a harness supplying the +5, -5 and +12 from the AR board.

Otherwise I can't test it. Still wouldn't be able to test the sound section
but it would be a start.

Cheers
Paul

chumblespuzz wrote:
>
> Hmmm... The reason I thought it was an RB instead of a BZ is that my BZ has
> 6 eproms and this board only has 4.
>
> So, what board looks the same ans BZ and RB but only has 4 eproms? Or, could
> this be a BZ or RB with a different eprom set?
>
> -roy-
>
> > I just pulled out my Red Baron boardset and it looks like a Red Baron to
> me.
> > The only difference I can see is mine has 6 eproms in the last row. Apart
> from
> > that I can't see any difference.
> >
> > Cheers
> > MacMan
> >
> > PS: I don't know whether this boardset is working or not, but if I run it
> up
> > in my Asteroids and it is - would anyone like to swap for a
> Cinematronics...
> > pretty much any Cinematronics boardset.
> >
> > chumblespuzz wrote:
> > >
> > > Hi All,
> > >
> > > This auction just closed on eBay:
> > >
> > > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=524788959
> > >
> > > Out of curiosity, is this a Red Barron board?
> > >
> > > Thanks,
> > > -roy-
> > >
> >
> > --------------------------------------------------------------------------
> -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Dec 15 19:53:32 2000