Re: 19V2000 vs G05-801 vs G05-802

Last time I checked it was... that's what the 19 in the model number is
for...

----- Original Message -----
From: "chumblespuzz" <chumblespuzz@home.com>
To: <vectorlist@synthcom.com>
Sent: Friday, January 26, 2001 12:42 PM
Subject: Re: VECTOR: 19V2000 vs G05-801 vs G05-802

> 19V2000 is a 19" monitor, isn't it?
>
> -roy-
>
> ----- Original Message -----
> From: "Jon Raiford" <raiford@mindspring.com>
> To: <vectorlist@synthcom.com>
> Sent: Thursday, January 25, 2001 7:57 AM
> Subject: Re: VECTOR: 19V2000 vs G05-801 vs G05-802
>
>
> > Well.. The Wells-Gardner 19V2000 is a 15" monitor, so that may not be
the
> best solution for an Asteroids upright. The G05-801 was the monitor that
> came with Asteroids and expects 80VAC. The G05-802 (depending on the rev)
> can either be a 19" or a 15". The G05-802's expect 60VAC. About 75% of
the
> G05's and V2000's I've seen, however, are bastardized monitors with parts
> from each tossed in. So its really hard to tell what you are looking at.
> Maybe a should write up a doc on identifying the various parts...
> >
> > Anyway, If these are all complete and original monitors, and if the
> transformer assembly in the Asteroids is the 80VAC CT version, I would go
> with the G05-801. Before you make your decision, you should take a volt
> meter to the transformer and see what it is sending to the monitor.
> >
> > Jon
> >
> > At 06:03 PM 1/24/2001 -0800, you wrote:
> > >I'm rebuilding my Asteroids upright (my first vector project) and have
> all
> > >of these monitors available to me. My question is, Given the
selection,
> > >why would I choose one monitor over another. Is any one more reliable?
> > >Is one easier to maintain? Thanks for your feedback.
> > >
> > >Steve
> >
>
> --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sat Jan 27 00:22:29 2001