Re: 19V2000 vs G05-801 vs G05-802

There might be a 15" version, the Tempest Cabaret used a 15" monitor did it
not? Also Atari's Black test fixture used a 15" Ampliphone monitor (or was
it 13"-it's been a while since I had one.

John :-#)#

At 08:51 AM 29/01/2001 -0500, you wrote:
>Doh! There I go confusing myself again.. If only it had been something a
>little less obvious :) Now, if I'm not totally mistaken.. I believe there
>is only a 19" version of the V2000 and no 15".
>
>Jon
>
>At 12:42 PM 1/26/2001 -0500, you wrote:
>>19V2000 is a 19" monitor, isn't it?
>>
>>-roy-
>>
>>----- Original Message -----
>>From: "Jon Raiford" <raiford@mindspring.com>
>>To: <vectorlist@synthcom.com>
>>Sent: Thursday, January 25, 2001 7:57 AM
>>Subject: Re: VECTOR: 19V2000 vs G05-801 vs G05-802
>>
>>
>> > Well.. The Wells-Gardner 19V2000 is a 15" monitor, so that may not be the
>>best solution for an Asteroids upright. The G05-801 was the monitor that
>>came with Asteroids and expects 80VAC. The G05-802 (depending on the rev)
>>can either be a 19" or a 15". The G05-802's expect 60VAC. About 75% of the
>>G05's and V2000's I've seen, however, are bastardized monitors with parts
>>from each tossed in. So its really hard to tell what you are looking at.
>>Maybe a should write up a doc on identifying the various parts...
>> >
>> > Anyway, If these are all complete and original monitors, and if the
>>transformer assembly in the Asteroids is the 80VAC CT version, I would go
>>with the G05-801. Before you make your decision, you should take a volt
>>meter to the transformer and see what it is sending to the monitor.
>> >
>> > Jon
>> >
>> > At 06:03 PM 1/24/2001 -0800, you wrote:
>> > >I'm rebuilding my Asteroids upright (my first vector project) and have
>>all
>> > >of these monitors available to me. My question is, Given the selection,
>> > >why would I choose one monitor over another. Is any one more reliable?
>> > >Is one easier to maintain? Thanks for your feedback.
>> > >
>> > >Steve
>> >
>> > --------------------------------------------------------------------------
>>-
>> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>>the
>> > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > ** questions, comments, or problems to neil@synthcom.com.
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jan 29 12:02:18 2001