Re: 19V2000 vs G05-801 vs G05-802

So is there a manual for the 15V2000? I have only ever seen the 19V2000 manual. I have an Omega Race mini that had a V2000 deflection board w/ what I thought was a G05 chasis. I suppose its possible it was a complete 15V2000, but I haven't seen any evidence online to support that claim. I'd love to see a manual if anyone can prove me wrong :)

Jon

At 11:08 AM 1/29/2001 -0500, you wrote:
>Jon! Of course there is a 15" version of the V2000. It's called a 15V2000. I recently tore one out of a bagged Omega Race cocktail. : ) Now, I guess the question is, is there a 15" G05? Idunno.
>
>Richard
>
>At 08:51 AM 1/29/2001 -0500, you wrote:
>>Doh! There I go confusing myself again.. If only it had been something a little less obvious :) Now, if I'm not totally mistaken.. I believe there is only a 19" version of the V2000 and no 15".
>>
>>Jon
>>
>>At 12:42 PM 1/26/2001 -0500, you wrote:
>> >19V2000 is a 19" monitor, isn't it?
>> >
>> >-roy-
>> >
>> >----- Original Message -----
>> >From: "Jon Raiford" <raiford@mindspring.com>
>> >To: <vectorlist@synthcom.com>
>> >Sent: Thursday, January 25, 2001 7:57 AM
>> >Subject: Re: VECTOR: 19V2000 vs G05-801 vs G05-802
>> >
>> >
>> > > Well.. The Wells-Gardner 19V2000 is a 15" monitor, so that may not be the
>> >best solution for an Asteroids upright. The G05-801 was the monitor that
>> >came with Asteroids and expects 80VAC. The G05-802 (depending on the rev)
>> >can either be a 19" or a 15". The G05-802's expect 60VAC. About 75% of the
>> >G05's and V2000's I've seen, however, are bastardized monitors with parts
>> >from each tossed in. So its really hard to tell what you are looking at.
>> >Maybe a should write up a doc on identifying the various parts...
>> > >
>> > > Anyway, If these are all complete and original monitors, and if the
>> >transformer assembly in the Asteroids is the 80VAC CT version, I would go
>> >with the G05-801. Before you make your decision, you should take a volt
>> >meter to the transformer and see what it is sending to the monitor.
>> > >
>> > > Jon
>> > >
>> > > At 06:03 PM 1/24/2001 -0800, you wrote:
>> > > >I'm rebuilding my Asteroids upright (my first vector project) and have
>> >all
>> > > >of these monitors available to me. My question is, Given the selection,
>> > > >why would I choose one monitor over another. Is any one more reliable?
>> > > >Is one easier to maintain? Thanks for your feedback.
>> > > >
>> > > >Steve
>> > >
>> > > --------------------------------------------------------------------------
>> >-
>> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>> >the
>> > > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > > ** questions, comments, or problems to neil@synthcom.com.
>> >
>> >---------------------------------------------------------------------------
>> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> >** message body to vectorlist-request@synthcom.com. Please direct other
>> >** questions, comments, or problems to neil@synthcom.com.
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jan 29 12:07:20 2001