RE: RFI shields. Was: Star Wars power

Also, RF shields on HV units (such as the G05) reduce/eliminate the RF that
potentially affects the HV circuit (typically running the HV unit w/o the
shield produces vector wiggles).

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Rosenzweig, Joel B
> Sent: Tuesday, May 29, 2001 10:33 AM
> To: 'vectorlist@synthcom.com'
> Subject: VECTOR: RFI shields. Was: Star Wars power
>
>
> I've been operating all of my games without the RFI shield that
> are referred
> to below. Can anyone offer a reason why they should be used in the home
> environment?
>
> Joel-
>
> -----Original Message-----
> From: Christopher X. Candreva [mailto:chris@westnet.com]
> Sent: Tuesday, May 29, 2001 12:02 PM
> To: vectorlist@synthcom.com
> Subject: VECTOR: Star Wars power
>
>
>
> Incidently, back when I first fixed my Star Wars (and AR2) I posted that
> my card interconnect board (the thing between the wire harness and the
> game boards) didn't deliver both +5v lines to the board. No one answered
> back that this was common or a fluke, but anyone with a SW might want to
> check this, if they haven't. I put a jumper wire through the via hole, so
> both +5 lines are now in use.
>
> Other than twice the current capacity, you now won't blow your AR2 if one
> of the pins stops making contact.
>
> -Chris
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> ------------------------------------------------------------------
> ---------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>
> ------------------------------------------------------------------
> ---------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue May 29 16:02:20 2001