Re[2]: Major Havoc/Tempest spinner problems

-----Original Message-----
From: jerry madsen <jetskimod@yahoo.com>
To: vectorlist@synthcom.com
Date: Mon, 25 Jun 2001 15:39:36 -0700 (PDT)
Subject: Re: VECTOR: Major Havoc/Tempest spinner problems

>
> I am getting 5 volts to the opto board,I guess I could
> try changing the 100 ohm resistor to a 150 ohm,I have
> an extra tempest spinner to mess with.Any other
> sugestions will be apreciated.Thanks.
> Jerry.
>
if you have a scope then check the outputs from the optosensors,
also check the led's for the correct voltage.

IF you remove the led's then you can check them like this:

connect them to 5v with a 330 ohm resister,
and look at them with a camcorder/digital camera.
ccd camera heads can 'see' infra-red, very handy thing to remember!!!!

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Jun 26 04:46:13 2001