Re: Wintron transformers

I suspect if it is offered as a kit then there would be little or no
potential liability...any lawyers out there on this list?

John -#)#

At 12:59 AM 12/07/2001, you wrote:
>Isn't the real reason why no hobbyist has designed and sold a replacement
>hv cage etc., is because of the liability! I would venture
>to say that you could be responsible for homes burning up if your
>circuit/hv unit caught fire.
>
>Just my thoughts on why it has not be done,
>Mark Capps
>
>peter jones wrote:
>
> > I dont know why you would want to build a transformer for a known bad
> circuit.
> >
> > there are 1000's of transformers available on the spares market for
> around $20 for tv's.
> >
> > if you know what output voltages you need, and we do know
> > then just find a suitable match, and design a circuit to give the
> correct drive.
> >
> > when i get the time i will do exactly that.
> >
> > i already got a 26" chassis from a medium-res wells-gardner(raster) and
> fitted a g08 yoke.
> > my next move is to make the electronics.
> >
> > i would suggest choosing a transformer designed for the most common
> type of tv in your country, it keeps the cost down.
> >
> > in europe that would be a philips G90 or CP110 transformer, i have
> schematics to the CP110 and already know the drive requirments.
> > THE TRANSFORMERS ARE 12 (US$17)!!!!!!!!!!
> >
> > c.u.
> >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jul 12 13:00:06 2001