Re: Major Havoc Art Repro Check

Richard,
    Hey that looks Great! There is much more room in Tempest then the Space Dual /
Black Widow conversion.
    Im blushing from all the publicity on that web page, Glad to see one in use!

-=Mark=-

someotherguy wrote:

> I've installed the roller on my Tempest conversion, and there was lots of room
> to work without worry of interfering with any of the artwork on the conversion
> overlay. I positioned it to where the top bolt holes were just slightly above
> the original bolt holes for the spinner. When comparing my NOS CPO to it, the
> "MOVE" artwork sits just right above it, the instructions are well off to the
> right, and no significant artwork is sacrificed. A small area of the gridwork
> to the right of the reactor is obscured.
>
> The one problem you could solve with a custom repro overlay would be the
> placement of the bolt holes. As it is, I am considering re-drilling the top
> plate (if spacing permits) to use the Tempest spinner bolt holes, and another
> narrower spaced set below them, in order to use the existing holes in my NOS CPO
> instead of having two empty black squares I'll have to fill with scrap material.
>
> If you'd like to see pics of the roller installed, please pardon the fact that
> the Tempest overlay is still on it, and check...
>
> http://people.atl.mediaone.net/someotherguy/mh_new.html
>
> Richard
>
> chumblespuzz wrote:
>
> > Hi Chris,
> >
> > (note: I cc'ed the vectorl list.)
> >
> > I was planning on looking into this, but now is as good a time as any.
> >
> > I would like to offer the conversion CPOs so that they can be used with
> > Mark's roller as well as the original spinners. There would be virtually no
> > art change, with the exception of possibly needing to move the "MOVE"
> > arrows. But to know, I would need some info from someone who has don it.
> >
> > So, has anyone here installed one of Mark's rollers in either a SD or
> > Tempest conversion? If so, where did you locate it (exactly)? Were there any
> > clearance/other issues that affected your choice of positioning?
> >
> > What I'm hoping to hear is that the roller is in the exact same position as
> > the spinner and that it was able to be mounted high enough that the art will
> > not need to be moved. The only difference would be the die-cutting.
> >
> > -roy-
> >
> > ----- Original Message -----
> > From: "Chris Loggans" <cloggans@yahoo.com>
> > To: <chumblespuzz@home.com>
> > Sent: Tuesday, July 17, 2001 3:48 AM
> > Subject: Re: VECTOR: Major Havoc Art Repro Check
> >
> > > Roy,
> > >
> > > Not to confuse the CPO issue any more, but wasn't
> > > there a discussion some time ago about creating a
> > > custom CPO for putting Mark's excellent repro roller
> > > controller into a Space Duel CP for a multi game
> > > setup? It seems like this would be the perfect
> > > opportunity to get these done if there was enough
> > > interest (and the graphic artist would be willing to
> > > put in the time :-). Do you think there would be
> > > enough interest and if so, what would it take to get a
> > > custom CPO drawn up? I'm not very artistic, but I'd
> > > be willing to help out in any way I could.
> > >
> > > Thanks,
> > > -Chris
> > >
> > >
> > >
> > > --- chumblespuzz <chumblespuzz@home.com> wrote:
> > > > Hello All,
> > > >
> > > > I spoke with a "know reproducer" regarding printing
> > > > some Major Havoc stuff,
> > > > and he is willing based on adequate interest. He
> > > > does not need a large
> > > > order, but the size will affect price. So, this
> > > > email is an interest check.
> > > >
> > > > We will be able to run multiple pieces in one run to
> > > > save money since they
> > > > all are the same color. The requirement is that the
> > > > art is reverse screened
> > > > on polycarbonate with the desire is that they are
> > > > fully die-cut. My plan is
> > > > to run the marquee and CPO for the dedicated machine
> > > > as well as Tempest and
> > > > Space Duel conversions.
> > > >
> > > > So, the question to you is, what would you want?
> > > > Please email me at
> > > > chumblespuzz@home.com and let me know what style(s)
> > > > you would be interested
> > > > in and how many. This is non-binding, only to guage
> > > > overall interest is such
> > > > a run.
> > > >
> > > > If you would like to see some of the art, check out:
> > > >
> > > >
> > > http://members.home.net/chumblespuzz/images/mh_marquee_conv.jpg
> > > >
> > > http://members.home.net/chumblespuzz/images/mh_marquee_ded.jpg
> > > >
> > > http://members.home.net/chumblespuzz/images/mh_cpo_ded.jpg
> > > >
> > > http://members.home.net/chumblespuzz/images/mh_cpo_sd.jpg
> > > >
> > > > Also, if you have one of these pieces of art NOS,
> > > > please let me know. Having
> > > > an original would be the best way to assure proper
> > > > die cutting.
> > > >
> > > > Thanks in advance,
> > > > -roy-
> > > >
> > > >
> > > >
> > > --------------------------------------------------------------------------
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message
> > > > with "UNSUBSCRIBE" in the
> > > > ** message body to vectorlist-request@synthcom.com.
> > > > Please direct other
> > > > ** questions, comments, or problems to
> > > neil@synthcom.com.
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Get personalized email addresses from Yahoo! Mail
> > > http://personal.mail.yahoo.com/
> > >
> >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jul 19 01:28:58 2001