Re: WG 6XXX Deflection: P.T.C.

Hello all. I got into this thread a bit late, but here's a link :-)

http://www.neiparts.net/cmparts/semiconductors.php3

It's the highlighted special at the top of the webpage. $1.99 each in
quantities of 10 or more. I found one other source, but they wanted
$3.86 apiece..

The part number is PTH451C. I ordered about 25 of these last year and
they sent me Sincera part # DGC3R20N which I assume is a direct cross of
the PTH451C.

HTH,
Noel

Rodger Boots wrote:
>
> You still need the PTC (or equivalent). Simply switching off with a relay without SLOWLY ramping the power to the coil
> down will end up magnetizing the tube instead of demagnetizing it.
>
> I'll try contacting Workman Electronics. They used to sell replacement PTCs for TV sets.
>
> peter jones wrote:
>
> > -----Original Message-----
> > From: DBT4251@aol.com
> > To: vectorlist@synthcom.com
> > Date: Fri, 20 Jul 2001 20:10:09 EDT
> > Subject: Re: VECTOR: WG 6XXX Deflection: P.T.C.
> >
> > >
> > > Hell, I can't even find one for my 4600, because no one can tell me what the
> > > value of it is. I have a 4600 sitting on a shelf just because of that part.
> > > The manual does not give a value. HELP! Dean
> > > ---------------------------------------------------------------------------
> >
> > in europe there is a company called 'konig' that makes replica ptc's for just about anything, see if they can help.
> >
> > if not then maybe its worth saying that most new monitors (vga) use a relay & timer instead of a ptc.
> > (be carefull with this technique, time the ptc on a working monitor - dont guess the delay!)
> >
> > ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jul 23 19:06:44 2001