Re: Self Test with Tempest multigame

I think my board is continually getting reset by the watchdog. I get about
90% of a Tempest logo on the screen (upside down) and then it redraws. So
when I hit the test switch, it's behaving like a power-on reset. I'll
disable the watchdog and see if I can get into test mode. I'm guessing the
mathbox board is having problems (upside down screen) plus Clay's menu
works fine but the game itself doesn't run.

-Werner

At 10:12 AM 10/22/2001 -0400, you wrote:
>On Sat, 20 Oct 2001, Werner Sharp wrote:
>
> > My Tempest died today and I have Clay's multigame kit installed. Is there
> > a way to get into the self-test screen? Using the self-test button inside
> > the coin door just gets me to the multigame menu, which works fine. I
> > searched the archives but didn't see the answer.
>
>Dang -- I know I've done this. Wait- - on mine, hitting the self-test switch
>puts me in self-test mode. You have to do a reset (or power-on) while the
>self-test is on to get to the menu.
>
>Maybe this is an indication of how your machine is broken -- or you are
>powering-on while in self-test.
>
>==========================================================
>Chris Candreva -- chris@westnet.com -- (914) 967-7816
>WestNet Internet Services of Westchester
>http://www.westnet.com/
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Oct 22 08:32:22 2001