Re: G05 Issue 2 Deflection

I think what you want is what I labelled an Issue 4 schematic. I only called it an Issue 4 schematic because I didn't known other deflection boards were out there (at the time). As it is, I have heard about Issue 2 boards recently on this list, but I haven't put my hands on one yet to document.

Jon

At 01:26 PM 2/4/2002 -0600, you wrote:
>Hi Jon,
>
>After taking a look, what you have are schematics from a G05-801 Issue 2
>*manual*. I'm trying to find information on a G05-802 "Issue 2"
>*deflection board*. I wouldn't have believed this board existed if I
>hadn't seen it with my own beaty eyes (or is that beety?)
>
>Damn those Electrohome engineers!
>
>tm
>
>
>Jon Raiford wrote:
>>
>> Take a look at my site. I have the schems for the Issue 2 deflection board and I have some quick wording on how to make it compatible with an issue 3 compatible chassis (to avoid the brightness problem). http://www.arcademonitors.com
>>
>> Jon
>>
>> At 11:34 AM 2/4/2002 -0600, you wrote:
>> >While I had one of this in my hands about a week ago, I couldn't find
>> >any glaring differences between a G05 'Issue 2' deflection board and
>> >the later revisions. The words "Issue 2" are screened on the top of the
>> >board in the upper right hand corner.
>> >
>> >I have been unable to find any mention of this revision in the manuals I
>> >have either, and naturally I didn't have the time to do a side-by-side
>> >comparison of the boards.
>> >
>> >Anyone? :)
>> >---------------------------------------------------------------------------
>> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> >** message body to vectorlist-request@synthcom.com. Please direct other
>> >** questions, comments, or problems to neil@synthcom.com.
>>
>> ---------------------------------------------------------------------------
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to neil@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 4 11:49:09 2002