Re: G05 Issue 2 Deflection

That could be it!

Jon Raiford wrote:
>
> I think what you want is what I labelled an Issue 4 schematic. I only called it an Issue 4 schematic because I didn't known other deflection boards were out there (at the time). As it is, I have heard about Issue 2 boards recently on this list, but I haven't put my hands on one yet to document.
>
> Jon
>
> At 01:26 PM 2/4/2002 -0600, you wrote:
> >Hi Jon,
> >
> >After taking a look, what you have are schematics from a G05-801 Issue 2
> >*manual*. I'm trying to find information on a G05-802 "Issue 2"
> >*deflection board*. I wouldn't have believed this board existed if I
> >hadn't seen it with my own beaty eyes (or is that beety?)
> >
> >Damn those Electrohome engineers!
> >
> >tm
> >
> >
> >Jon Raiford wrote:
> >>
> >> Take a look at my site. I have the schems for the Issue 2 deflection board and I have some quick wording on how to make it compatible with an issue 3 compatible chassis (to avoid the brightness problem). http://www.arcademonitors.com
> >>
> >> Jon
> >>
> >> At 11:34 AM 2/4/2002 -0600, you wrote:
> >> >While I had one of this in my hands about a week ago, I couldn't find
> >> >any glaring differences between a G05 'Issue 2' deflection board and
> >> >the later revisions. The words "Issue 2" are screened on the top of the
> >> >board in the upper right hand corner.
> >> >
> >> >I have been unable to find any mention of this revision in the manuals I
> >> >have either, and naturally I didn't have the time to do a side-by-side
> >> >comparison of the boards.
> >> >
> >> >Anyone? :)
> >> >---------------------------------------------------------------------------
> >> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >> >** message body to vectorlist-request@synthcom.com. Please direct other
> >> >** questions, comments, or problems to neil@synthcom.com.
> >>
> >> ---------------------------------------------------------------------------
> >> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >> ** message body to vectorlist-request@synthcom.com. Please direct other
> >> ** questions, comments, or problems to neil@synthcom.com.
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 4 12:11:48 2002