Re: Wells-Gardner Service Manual for K6100

I have had the 3rd printing of the manual on my site since the beginning :) I haven't put a copy of the first printing online yet (the one w/ the Tempest display on the front cover), but I have a copy ready to go whenever I find the time to do some scanning.

Anyway, the 3rd printing definitely doesn't have a page 31, so I assume Gregg was referring to a different document.

Jon

At 03:46 PM 2/20/2002 -0600, you wrote:
>Jon,
>
>I was under the impression that Gregg was referring to all three
>revisions of the WG6100 manual. Revision 1 and Revision 2 are scanned an
>on the net. I don't think the 3rd and final revision is up anywhere
>though.
>
>And yes, I will get off my lazy butt and finish the Wells-Gardner 6100
>FAQ revision shortly (had to get the Amplifone and G08 documents done
>first, right guys? :) Gregg, if you are reading this, drop me an e-mail
>as I haven't ever heard a response back from you.
>
>ta,
>tom
>
>
>Jon Raiford wrote:
>>
>> I was taking a nice close look at Gregg Woodcock's infamous xy monitor doc and noticed that I forgot all about another manual that apparently exists, but that I haven't seen. He states the following:
>>
>> "Also, if you are lucky enough to have a copy of the Wells-Gardner service manual for this monitor, the parts list on page 31 has an error; it lists C916 as .35uF when it is really .035uF."
>>
>> Does anyone have this manual scanned in? Or is anyone willing to scan it in? Or willing to send it to me to be scanned in? :) Or has it been available forever and I am just having a brain fart?
>>
>> Thanks
>>
>> Jon
>>
>> ---------------------------------------------------------------------------
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to neil@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Feb 20 13:53:43 2002