Re: Re: Bulk buy on Wintron flybacks

About 2-3 years ago I bought one for my Star Wars and the single-quantity
price was $200.

Just some food for thought....

         - Matt

At 01:25 PM 4/11/2002 -0700, you wrote:
>I can order a prepaid order, but the last bulk pricing I got was in 1996:
> 1 unit @ $156.14
>10 pieces @ $147.62
>25 pieces @ $135.32
>50 pieces @ $124.91
>100 pieces @ $119.40
>
>The 50 lot looks like the most cost effective. I would have to charge
>about 10 - 15% to cover my costs of customs clearance and staff time
>handling the orders.
>
>If you are talking 50 units it might be better for someone in the US with
>a company order them to avoid the customs costs...
>
> Don't have a whole bunch of people ask Wintron for current
> pricing, it would be better for the group to co-ordinate ONE person to
> contact them and handle everything, otherwise the nuisance factor of
> twenty people all calling for bulk order might make them not want to be
> reasonable about it...Whoever does order should also find out if Wintron
> has a warranty on the transformers...
>
>John :-#)#
>
>At 03:23 PM 11/04/2002 -0400, big dog wrote:
>>Hi,
>>
>>I have heard folks in here talk about doing a bulk buy on these so many times
>>but I have never seen anything become of it. I think I read a post where
>>John
>>Robertson was willing to do it if he could get some folks to prepay. I
>>can use
>>4 -5 of these so Im very interested. Lets get this thing going
>>.......who all
>>would be willing to do it?
>>
>>Mark Capps
>>
>>Michael Thomas wrote:
>>
>> > Yes Joe, it is a ground. As a matter of fact it is the center tap to the
>> > 3-wire monitor power connection! I'm amazed anyone would cut this wire.
>> > That gray wire goes to pin 14 on the monitor's 15-pin main input connector
>> > (J100). It's the pin between the two violet wires on one end of the
>> > connector. After passing through the connector, it veers off with the two
>> > 25 volt power wires. It is also the center pin on this 3-pin connector.
>> > Once again, you would absolutely want to rework this one.
>> >
>> > Michael
>> >
>> > ----- Original Message -----
>> > From: "Joe Bachmann" <joe.bachmann@newmail.net>
>> > To: <vectorlist@synthcom.com>
>> > Sent: Wednesday, April 10, 2002 12:30 AM
>> > Subject: Re: VECTOR: WG 6100 GRY wire
>> >
>> > > Now I need to ask this: Is the wire marked GRY next to the large caps on
>> > the
>> > > deflection board also a ground?
>> > >
>> > > I have found on all thw WG 6100 parts I have that these wires have been
>> > chopped
>> > > (probably by ops.)
>> > >
>> > > Thanks much,
>> > > Joe
>> > >
>> > > Chris Starr wrote:
>> > >
>> > > > I can confirm, definitely a grounding wire. Bolts on to the aluminum
>> > chassis
>> > > > on one of the holes between the HV chassis box and the deflection
>> board
>> > on
>> > > > the right. Probably will help reduce the jitters you mentioned.
>> > > >
>> > > > c-starr
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "Michael Thomas" <thomin@bellsouth.net>
>> > > > To: <vectorlist@synthcom.com>
>> > > > Sent: Tuesday, April 09, 2002 9:51 PM
>> > > > Subject: Re: VECTOR: WG 6100 GRY wire
>> > > >
>> > > > > The gray (grey?) wire attaches to the bottom aluminum plate of the
>> > > > chassis,
>> > > > > under
>> > > > > the same screw as the wire coming from the spring that stretches
>> along
>> > the
>> > > > > bottom
>> > > > > of the tube. I would DEFINITELY re-connect it. As stated so many
>> > times
>> > > > > before
>> > > > > on Vectorlist, grounds are very important.
>> > > > >
>> > > > > Michael
>> > > > >
>> > > > > ----- Original Message -----
>> > > > > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
>> > > > > To: <vectorlist@synthcom.com>
>> > > > > Sent: Tuesday, April 09, 2002 4:31 PM
>> > > > > Subject: Re: VECTOR: WG 6100 GRY wire
>> > > > >
>> > > > >
>> > > > > > I just wired one of these, but I think it ties down to the
>> chassis,
>> > I
>> > > > can
>> > > > > take
>> > > > > > a look tonight.
>> > > > > >
>> > > > > > L.
>> > > > > >
>> > > > > >
>> > > > > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
>> > > > > > >
>> > > > > > > Where does the wire marked GRY next to the tube socket on neck
>> > board
>> > > > of
>> > > > > a
>> > > > > > > WG 6100 go to?
>> > > > > > >
>> > > > > > > Both mine have this broke off. Does this even make a difference?
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > > Joe
>> > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > > >
>> > >
>> --------------------------------------------------------------------------
>> > > > > -
>> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE"
>> > > > in
>> > > > > the
>> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
>> direct
>> > > > other
>> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > > > >
>> > > > >
>> > > >
>> > >
>> --------------------------------------------------------------------------
>> > > > > -
>> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> > "UNSUBSCRIBE"
>> > > > in
>> > > > > the
>> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
>> direct
>> > > > other
>> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > > > >
>> > > > > >
>> > > > > > __________________________________________________
>> > > > > > Do You Yahoo!?
>> > > > > > Yahoo! Tax Center - online filing with TurboTax
>> > > > > > http://taxes.yahoo.com/
>> > > > >
>> > > >
>> > >
>> --------------------------------------------------------------------------
>> > > > > -
>> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE"
>> > in
>> > > > > the
>> > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> > other
>> > > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > > >
>> > > >
>> > >
>> --------------------------------------------------------------------------
>> > > > -
>> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>> > in
>> > > > the
>> > > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> > other
>> > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > >
>> > >
>> > >
>> --------------------------------------------------------------------------
>> > -
>> > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE" in
>> > the
>> > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> other
>> > > > ** questions, comments, or problems to neil@synthcom.com.
>> > >
>> > >
>> --------------------------------------------------------------------------
>> > -
>> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>> > the
>> > > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > > ** questions, comments, or problems to neil@synthcom.com.
>> >
>> >
>> ---------------------------------------------------------------------------
>> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>> in the
>> > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > ** questions, comments, or problems to neil@synthcom.com.
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.
>
>
>
>Matthew Sell
>Programmer
>On Time Support, Inc.
>www.ontimesupport.com
>(281) 296-6066
>
>Join the Metrology Software discussion group METLIST!
>http://www.ontimesupport.com/subscribe_t&c.html.
>
>
>"One World, One Web, One Program" - Microsoft Promotional Ad
>"Ein Volk, Ein Reich, Ein Fuhrer" - Adolf Hitler
>
>Many thanks for this tagline to a fellow RGVAC'er...

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Apr 11 14:02:51 2002