RE: Re: Bulk buy on Wintron flybacks

I checked into this about 6 months ago and was told there was no longer
a quantity discount. It's still worth a try - maybe their policy has
changed.

I'd take 1 if someone can get a discount.

Werner Sharp
sharpw@bellsouth.net

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com] On Behalf Of Jeff Hendrix
> Sent: Thursday, April 11, 2002 3:40 PM
> To: vectorlist@synthcom.com
> Subject: RE: VECTOR: Re: Bulk buy on Wintron flybacks
>
>
> Depending on price I could use 2 to 4.
> -jeff
>
> -----Original Message-----
> From: big dog [mailto:catfishh@bellsouth.net]
> Sent: Thursday, April 11, 2002 1:23 PM
> To: vectorlist@synthcom.com
> Subject: VECTOR: Re: Bulk buy on Wintron flybacks
>
> Hi,
>
> I have heard folks in here talk about doing a bulk buy on
> these so many
> times
> but I have never seen anything become of it. I think I read a post
> where John
> Robertson was willing to do it if he could get some folks to
> prepay. I
> can use
> 4 -5 of these so Im very interested. Lets get this thing going
> .......who all
> would be willing to do it?
>
> Mark Capps
>
> Michael Thomas wrote:
>
> > Yes Joe, it is a ground. As a matter of fact it is the
> center tap to
> the
> > 3-wire monitor power connection! I'm amazed anyone would cut this
> wire.
> > That gray wire goes to pin 14 on the monitor's 15-pin main input
> connector
> > (J100). It's the pin between the two violet wires on one end of the
> > connector. After passing through the connector, it veers
> off with the
> two
> > 25 volt power wires. It is also the center pin on this 3-pin
> connector.
> > Once again, you would absolutely want to rework this one.
> >
> > Michael
> >
> > ----- Original Message -----
> > From: "Joe Bachmann" <joe.bachmann@newmail.net>
> > To: <vectorlist@synthcom.com>
> > Sent: Wednesday, April 10, 2002 12:30 AM
> > Subject: Re: VECTOR: WG 6100 GRY wire
> >
> > > Now I need to ask this: Is the wire marked GRY next to the large
> caps on
> > the
> > > deflection board also a ground?
> > >
> > > I have found on all thw WG 6100 parts I have that these wires have
> been
> > chopped
> > > (probably by ops.)
> > >
> > > Thanks much,
> > > Joe
> > >
> > > Chris Starr wrote:
> > >
> > > > I can confirm, definitely a grounding wire. Bolts on to the
> aluminum
> > chassis
> > > > on one of the holes between the HV chassis box and the
> deflection
> board
> > on
> > > > the right. Probably will help reduce the jitters you mentioned.
> > > >
> > > > c-starr
> > > >
> > > > ----- Original Message -----
> > > > From: "Michael Thomas" <thomin@bellsouth.net>
> > > > To: <vectorlist@synthcom.com>
> > > > Sent: Tuesday, April 09, 2002 9:51 PM
> > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > >
> > > > > The gray (grey?) wire attaches to the bottom aluminum plate of
> the
> > > > chassis,
> > > > > under
> > > > > the same screw as the wire coming from the spring
> that stretches
> along
> > the
> > > > > bottom
> > > > > of the tube. I would DEFINITELY re-connect it. As stated so
> many
> > times
> > > > > before
> > > > > on Vectorlist, grounds are very important.
> > > > >
> > > > > Michael
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
> > > > > To: <vectorlist@synthcom.com>
> > > > > Sent: Tuesday, April 09, 2002 4:31 PM
> > > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > > >
> > > > >
> > > > > > I just wired one of these, but I think it ties down to the
> chassis,
> > I
> > > > can
> > > > > take
> > > > > > a look tonight.
> > > > > >
> > > > > > L.
> > > > > >
> > > > > >
> > > > > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
> > > > > > >
> > > > > > > Where does the wire marked GRY next to the tube socket on
> neck
> > board
> > > > of
> > > > > a
> > > > > > > WG 6100 go to?
> > > > > > >
> > > > > > > Both mine have this broke off. Does this even make a
> difference?
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Joe
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > > > > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE"
> > > > in
> > > > > the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
> direct
> > > > other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > > > >
> > > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > > > > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE"
> > > > in
> > > > > the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
> direct
> > > > other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Yahoo! Tax Center - online filing with TurboTax
> > > > > > http://taxes.yahoo.com/
> > > > >
> > > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > > > > -
> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE"
> > in
> > > > > the
> > > > > > ** message body to vectorlist-request@synthcom.com. Please
> direct
> > other
> > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > >
> > > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > > > -
> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE"
> > in
> > > > the
> > > > > ** message body to vectorlist-request@synthcom.com. Please
> direct
> > other
> > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > >
> > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in
> > the
> > > > ** message body to vectorlist-request@synthcom.com.
> Please direct
> other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> > >
> --------------------------------------------------------------
> ----------
> --
> > -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE"
> in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> >
> --------------------------------------------------------------
> ----------
> ---
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> in the
> > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------
> ----------
> ---
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in
> the
> ** message body to vectorlist-request@synthcom.com. Please
> direct other
> ** questions, comments, or problems to neil@synthcom.com.
> --------------------------------------------------------------
> -------------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please
> direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Apr 11 14:11:30 2002