Re: Re: Bulk buy on Wintron flybacks

From: Tim Tewalt <tim_at_srccomp.com>
Date: Thu Apr 11 2002 - 17:13:54 EDT

Well, I spoke with them in '95 or so, I think. My notebook is at
home, but I believe it has the phone and fax numbers and a point
of contact. Will let you know.

Tim

----- Original Message -----
From: "big dog" <catfishh@bellsouth.net>
To: <vectorlist@synthcom.com>
Sent: Thursday, April 11, 2002 2:17 PM
Subject: Re: VECTOR: Re: Bulk buy on Wintron flybacks

> Hi,
>
> If folks will respond to me about this, then Iam willing to take the
prepaid
> orders and buy them. The more we can get the better. I will also need
> someone's help who has spoke to them in the past about the pricing on
bulk.
> Lets do this once and for all.....come on folks speak up.....now is the
chance!!
>
> Later,
> Mark Capps
>
> "Bachmann, Joe C" wrote:
>
> > Last time I spoke with them (about a month ago), they said we'd probably
> > have to get 25 together to get a break.
> >
> > It seems that the make them in lots of 25, hence why this would be the
brek
> > point.
> >
> > I could be in for 2 price depending.
> >
> > Joe
> >
> > -----Original Message-----
> > From: big dog [mailto:catfishh@bellsouth.net]
> > Sent: Thursday, April 11, 2002 2:23 PM
> > To: vectorlist@synthcom.com
> > Subject: VECTOR: Re: Bulk buy on Wintron flybacks
> >
> > Hi,
> >
> > I have heard folks in here talk about doing a bulk buy on these so many
> > times
> > but I have never seen anything become of it. I think I read a post
where
> > John
> > Robertson was willing to do it if he could get some folks to prepay. I
can
> > use
> > 4 -5 of these so Im very interested. Lets get this thing going
.......who
> > all
> > would be willing to do it?
> >
> > Mark Capps
> >
> > Michael Thomas wrote:
> >
> > > Yes Joe, it is a ground. As a matter of fact it is the center tap to
the
> > > 3-wire monitor power connection! I'm amazed anyone would cut this
wire.
> > > That gray wire goes to pin 14 on the monitor's 15-pin main input
connector
> > > (J100). It's the pin between the two violet wires on one end of the
> > > connector. After passing through the connector, it veers off with the
two
> > > 25 volt power wires. It is also the center pin on this 3-pin
connector.
> > > Once again, you would absolutely want to rework this one.
> > >
> > > Michael
> > >
> > > ----- Original Message -----
> > > From: "Joe Bachmann" <joe.bachmann@newmail.net>
> > > To: <vectorlist@synthcom.com>
> > > Sent: Wednesday, April 10, 2002 12:30 AM
> > > Subject: Re: VECTOR: WG 6100 GRY wire
> > >
> > > > Now I need to ask this: Is the wire marked GRY next to the large
caps on
> > > the
> > > > deflection board also a ground?
> > > >
> > > > I have found on all thw WG 6100 parts I have that these wires have
been
> > > chopped
> > > > (probably by ops.)
> > > >
> > > > Thanks much,
> > > > Joe
> > > >
> > > > Chris Starr wrote:
> > > >
> > > > > I can confirm, definitely a grounding wire. Bolts on to the
aluminum
> > > chassis
> > > > > on one of the holes between the HV chassis box and the deflection
> > board
> > > on
> > > > > the right. Probably will help reduce the jitters you mentioned.
> > > > >
> > > > > c-starr
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Michael Thomas" <thomin@bellsouth.net>
> > > > > To: <vectorlist@synthcom.com>
> > > > > Sent: Tuesday, April 09, 2002 9:51 PM
> > > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > > >
> > > > > > The gray (grey?) wire attaches to the bottom aluminum plate of
the
> > > > > chassis,
> > > > > > under
> > > > > > the same screw as the wire coming from the spring that stretches
> > along
> > > the
> > > > > > bottom
> > > > > > of the tube. I would DEFINITELY re-connect it. As stated so
many
> > > times
> > > > > > before
> > > > > > on Vectorlist, grounds are very important.
> > > > > >
> > > > > > Michael
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
> > > > > > To: <vectorlist@synthcom.com>
> > > > > > Sent: Tuesday, April 09, 2002 4:31 PM
> > > > > > Subject: Re: VECTOR: WG 6100 GRY wire
> > > > > >
> > > > > >
> > > > > > > I just wired one of these, but I think it ties down to the
> > chassis,
> > > I
> > > > > can
> > > > > > take
> > > > > > > a look tonight.
> > > > > > >
> > > > > > > L.
> > > > > > >
> > > > > > >
> > > > > > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
> > > > > > > >
> > > > > > > > Where does the wire marked GRY next to the tube socket on
neck
> > > board
> > > > > of
> > > > > > a
> > > > > > > > WG 6100 go to?
> > > > > > > >
> > > > > > > > Both mine have this broke off. Does this even make a
difference?
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Joe
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
>
> --------------------------------------------------------------------------
> > > > > > -
> > > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > > "UNSUBSCRIBE"
> > > > > in
> > > > > > the
> > > > > > > > ** message body to vectorlist-request@synthcom.com. Please
> > direct
> > > > > other
> > > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > > >
> > > > > >
> > > > >
> > > >
>
> --------------------------------------------------------------------------
> > > > > > -
> > > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > > "UNSUBSCRIBE"
> > > > > in
> > > > > > the
> > > > > > > > ** message body to vectorlist-request@synthcom.com. Please
> > direct
> > > > > other
> > > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > > >
> > > > > > >
> > > > > > > __________________________________________________
> > > > > > > Do You Yahoo!?
> > > > > > > Yahoo! Tax Center - online filing with TurboTax
> > > > > > > http://taxes.yahoo.com/
> > > > > >
> > > > >
> > > >
>
> --------------------------------------------------------------------------
> > > > > > -
> > > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE"
> > > in
> > > > > > the
> > > > > > > ** message body to vectorlist-request@synthcom.com. Please
direct
> > > other
> > > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > > >
> > > > >
> > > >
>
> --------------------------------------------------------------------------
> > > > > -
> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
"UNSUBSCRIBE"
> > > in
> > > > > the
> > > > > > ** message body to vectorlist-request@synthcom.com. Please
direct
> > > other
> > > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > > >
> > > >
> > > >
>
> --------------------------------------------------------------------------
> > > -
> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
"UNSUBSCRIBE"
> > in
> > > the
> > > > > ** message body to vectorlist-request@synthcom.com. Please direct
> > other
> > > > > ** questions, comments, or problems to neil@synthcom.com.
> > > >
> > > >
>
> --------------------------------------------------------------------------
> > > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
in
> > > the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct
other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> > >
>
> --------------------------------------------------------------------------
-
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct
other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Apr 11 14:20:29 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:59 EDT