RE: Question Regarding the Large Red Interconnect Cable o n a STAR WAR S BOARDSET.

Douglas,
*******

 Thank you, and much appreciate the JPEG as well.
 Looks fairly straight forward.

 Arcadius..... :-)

-----Original Message-----
From: Douglas Gauck [mailto:0k64dgau@gte.net]
Sent: Tuesday, September 03, 2002 11:03 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Question Regarding the Large Red Interconnect Cable
on a STAR WAR S BOARDSET.

They go like this:

3==========E
3==========E
3==========E

Purple, blue, green yellow, n/c, red, brown

or if you like you can go to:

http://64.192.41.141/swaudio.jpg

-Douglas

on 9/3/02 7:42 PM, Stempak Arcadius-ASTEMPA1 at ASTEMPA1@motorola.com wrote:

>
> All,
> ****
>
> Have a rather Simple Question, but since I have not been
> able to get an answer I thought I would ask all you Star Wars
> Experts, out there.
>
> O.K. I have the Typical 3 Boardset ATARI StarWars (Vector)
> Sandwich. However I am missing the Large Red Connector
> on the end Cable, which Resides between the SOUND/SPEECH BOARD
> and the MAIN BOARD if I recall correctly. Anyhow the Question is,
> do the Big Pins that this Cable connects, Connect Up on a One for
> One Basis,(Pin 1 to Pin 1, Pin 2 to Pin 2,,, etc...)??? Or
> is there some kind of Swapping going on when Connecting these Pins
> from Board to Board ???
>
> Also and just out of Curiousity what is this Cable actually used for
> Does it Carry any type of Data, or just Power Connections from Board
> to Board ???
>
>
>
> Arcadius.......... :-)
>
>
>
---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Sep 3 21:39:50 2002