-----Original Message-----
From: A218@aol.com
To: vectorlist@synthcom.com
Date: Sat, 28 Sep 2002 09:22:18 EDT
Subject: Re: VECTOR: HV transformers - help!
>
> In a message dated 9/28/02 12:09:13 AM Eastern Daylight Time,
> highwayman2000@mail.ru writes:
>
> << - can someone who has a G08 (and knows what they are doing) please wind
> the voltage down to 19.5 KV and report any problems with the image. >>
>
> Can the HV be reduced without reducing the overall B+ level in the monitor?
> I am not familiar with the G08, but in most TV and monitor circuits, HV
> reduction is accomplished by reducing the DC level coming out of the
> regulator.
>
> If the overall B+ level is reduced there may be some size issues with the
> monitor that would appear.
>
>
yes, B+ will be reduced, but in G08 i think it is only used for the guns, i am sure the yoke is powered from another source.
of course brightness can be turned up to compensate to a degree.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sat Sep 28 09:11:37 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:09 EDT