RE: Question on using TLO81 in place of a TLO82 IC

Rodger,
^^^^^^

 Thank You........

Arcadius......... :-)

-----Original Message-----
From: Robert Mudryk [mailto:rob@lasers.org]
Sent: Thursday, October 03, 2002 2:25 AM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Question on using TLO81 in place of a TLO82 IC

>From memory.. the TL081 and TL083 are not compatible with the 82 or
84... TL082 is still sold at Radio Shack... sad to say that the
TL084 is no longer available there :(

Rodger Boots wrote:

> I was under the impression that the TL081 had ONE opamp, the TL082 had
> TWO opamps, and the TL084 had FOUR op amps in the package. I know I
> should look it up, oh all right, I'll look it up......
>
> Yup, just as I said above. If you have a socket for the TL082 the
> '081 isn't going to cut it.
>
> Hint: Radio Shack stocks the TL082 as part number 276-1715.
>
>
> Stempak Arcadius-ASTEMPA1 wrote:
>
>> All,
>> ****
>>
>>
>> Does anyone know, based on TECH DOCS for Both the
>> TLO81 and TLO82 IC's. Can the TLO81 which in addition
>> to the usual (+ IN) and (- IN) Inputs as well as the (OUT) Output,
>> also contains an OFFSET N1 and OFFSET N2.
>>
>> Based on this can this Chip be used in place of a TLO82 ???
>>
>> I am out of TLO82's so am trying to use what I have.
>>
>>
>>
>> Arcadius.............. :-)
>>
---------------------------------------------------------------------------
>>
>>
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Oct 3 14:23:03 2002