Re: Who fixes Cinematronics boards?

So, board 309A provides the +5V with common grounds?

Matt Rossiter wrote:

> I've posted some scans of the Kurz Kasch cards here -->
> http://rossiters.com/cinematronics
>
> I apologize for my lack of cropping on the last picture. I also positioned
> the capacitors straight up so you could see the traces better, but naturally
> it lifted up the card from the scanner a bit, so it'll look a little out of
> focus.
>
> If you need more scans or descriptions let me know.
>
> Matt
>
> ----- Original Message -----
> From: "Paul Sommers" <rgvac_macman@froggy.com.au>
> To: <vectorlist@synthcom.com>
> Sent: Monday, October 14, 2002 12:32 PM
> Subject: Re: VECTOR: Who fixes Cinematronics boards?
>
> > Matt,
> >
> > A scan would be great. I've tried opening the postscript layout files on
> > Spies, but I can't find a Mac postscript viewer that doesn't abort with
> > an error.
> >
> > Cheers
> > Paul
> > On Tuesday, October 15, 2002, at 04:41 AM, Matt Rossiter wrote:
> >
> > > I use the Kurz Kasch test fixture with a Signature Analyzer. If anyone
> > > is
> > > interested in having me scan in an image of the exorsizor cards, I'd be
> > > happy to do so. I don't think they'd be that hard to reproduce.
> > >
> > > I've had great success using it. I once fixed a rip-off board in about
> > > an
> > > hour one time. Other games have taken me a couple days.
> > >
> > >
> > > Matt
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Paul Sommers" <rgvac_macman@froggy.com.au>
> > > To: <vectorlist@synthcom.com>
> > > Sent: Monday, October 14, 2002 12:37 AM
> > > Subject: Re: VECTOR: Who fixes Cinematronics boards?
> > >
> > >
> > >> I now have a signature Analyzer and I was going to try and build an
> > >> Exorcisor with the schematics on Spies. Anyone done this? Any comments?
> > >> Doesn't look too hard, but again I'm probably missing something.
> > >>
> > >> Cheers
> > >> MacMan
> > >>
> > >> On Monday, October 14, 2002, at 06:47 AM, Gregg Woodcock wrote:
> > >>
> > >>>
> > >>> ----- Original Message -----
> > >>> From: "John Robertson" <jrr@flippers.com>
> > >>> To: <vectorlist@synthcom.com>
> > >>> Sent: Wednesday, October 02, 2002 1:33 AM
> > >>> Subject: VECTOR: Who fixes Cinematronics boards?
> > >>>
> > >>>
> > >>>> I'm seeing a few posts on RGVAC about folks needing these repaired. I
> > >>> don't
> > >>>> have the signature fixture so I'm not attempting to fix them at this
> > >>>> time.
> > >>>> Anyone know who does fix these turkeys?
> > >>>
> > >>> I have had significant success by using logic comparators. There are
> > >>> several chips which do not register properly with a logic comparator
> > >>> but now
> > >>> I know which ones they are and how to read them. I would be willing
> > >>> to
> > >>> repair PCBs for people BUT I have a huge backlog (6 -12 months of
> > >>> work)
> > >>> AND
> > >>> I need to make enough room in my garage to fit another machine to use
> > >>> as a
> > >>> test bed. If that doesn't scare you off, email me with your situation
> > >>> and
> > >>> I'll get back to you when I am dug out and ready to take on new
> > >>> repairs...
> > >>>
> > >>
> >
> >> -------------------------------------------------------------------------
> -
> > > -
> > >>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> > >>> in
> > >>> the
> > >>> ** message body to vectorlist-request@synthcom.com. Please direct
> > >>> other
> > >>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> > >>>
> > >>
> >
> >> -------------------------------------------------------------------------
> -
> > > -
> > >> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > > the
> > >> ** message body to vectorlist-request@synthcom.com. Please direct other
> > >> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> > >
> >
> > --------------------------------------------------------------------------
> -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> > >
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Oct 14 16:40:34 2002