Re[2]: WG6100 HT transformers

-----Original Message-----
From: John Robertson <jrr@flippers.com>
To: vectorlist@synthcom.com, "VectorList" <vectorlist@synthcom.com>
Date: Wed, 16 Oct 2002 10:02:19 -0700
Subject: Re: VECTOR: WG6100 HT transformers

>
> Do NOT try to run the HV unit with a broken bolt. It is part of the
> resonant circuit (I believe). You should be able to silver solder the two
> pieces back together...
>
> John :-#)#
>
I did not try to run it, i dont know about resonance but it is needed to keep the core together.

unfortunatly the owner(not me) has been using it for a while, and there is serious signs of overheating.
the resin viewed from below is brown!!!!

luckily for the owner the trusty ozzy LOPT tester says O.K.

c.u.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Oct 16 13:30:13 2002