Bachmann, Joe wrote:
>I am having trouble with 3 HV units. I can only get 16kv out of them and can
>not adjust the HV higher or lower. I believe the issue was caused by a bad
>deflection board. I have checked Q900-905 and the resistors mentioned in the
>flowchart as well as the 160v 33uf cap. All are good. What am I missing?
>
>One of the units was working until I removed it from a working game and
>tested it with the deflection board I was working on. Is it possible that
>the deflection board damaged the HV unit somehow, or just a coincidence?
>
>Thanks,
>JB
>
You might want to check the +28 and -28 volt supplies from the
deflection board. If one of those were real low you might get the
symptoms you describe.
>
>
-- Interested in a possible way to financial freedom? Please check out www.quickinfo247.com/7622016/FREE --------------------------------------------------------------------------- ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the ** message body to vectorlist-request@synthcom.com. Please direct other ** questions, comments, or problems to vectorlist-owner@synthcom.com.Received on Mon Oct 28 11:19:18 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:13 EDT