Gregg Woodcock wrote:
>The first raster hack I did was NO PROBLEMO! But these last 2 have the
>unusual problem that the brightness is WAY, WAY too high. It is not the
>case of a bad brightness pot because I can see a definite change when it is
>used. It is just that the range is way too high. I tried adding in almost
>1MOhm in series with the G2 connection to the picture tube and it was still
>dazzlingly bright. Is there a good way to drop the G2 somewhere before it
>gets ramped up (i.e. low voltage and low resistor)? John, is there
>something I may have forgotten that I did the first time that I'm not doing
>on these last 2?
>
>
>
Instead of putting the 1 megohm in series with the G2 line try
connecting it from the G2 line to ground.
-- Interested in a possible way to financial freedom? Please check out www.quickinfo247.com/7622016/FREE --------------------------------------------------------------------------- ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the ** message body to vectorlist-request@synthcom.com. Please direct other ** questions, comments, or problems to vectorlist-owner@synthcom.com.Received on Wed Nov 6 23:01:24 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:14 EDT